| BORE DIAMETER | 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DC33,FSCM 71984 MFR REF SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM |
| OVERALL WIDTH | 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | STEEL COMP 1010 RETAINER |
| MATERIAL | STEEL COMP 430F SHIELD |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| SPECIAL FEATURES | STABILIZE TO OPERATE MINUS 55 DEG CENTIGRADE TO PLUS 180 DEG CENTIGRADE; LUBE QTY 3.0 GMS MIN AND 4.2 GMS MAX; ELECTRIC MOTOR QUALITY |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |