|
|
|
National Stock Number:
3110-00-114-5995
Federal Supply Class:
3110
National Item Identification Number:
001145995
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 101559 | 0B6Z5 | OMATECH SERVICE LTD | | 1353AS125-1 | 21760 | SCHATZ BEARING CORPORATION | | 1353AS125-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 1353AS125-1 | 34883 | CINETIC LANDIS GRINDING CORP. | | 1353AS125-1 | 52676 | SKF USA INC. | | 148 | 54252 | STANLEY BLACK & DECKER, INC. | | 303 SZZ | 38443 | SKF USA INC. | | 303PPC2FS381A | 21335 | TIMKEN CO | | 6303-2RS | 36121 | SKF CANADA LTD | | 6303-2RS | 52676 | SKF USA INC. | | 6303-2RS/LHT55 | 52676 | SKF USA INC. | | 6303-2RS1/LHT23 | 52676 | SKF USA INC. | | 7190-0357-00 | 06900 | DI-AN CONTROLS INC | | 731739 | 12603 | CLARK EQUIPMENT CO | | 92600-0500 | 31425 | ITT JABSCO PRODUCTS | | 99603 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | FF-B-171/05J03E2X | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | Z99603 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 17.0 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL OUTSIDE DIAMETER | 47.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 14.0 MILLIMETERS NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|