| DISTANCE BETWEEN HOLES ALONG LENGTH | 1.886 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 1.320 INCHES NOMINAL |
| DISTANCE FROM CENTER OF PLATE TO FLAT | 1.000 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.660 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.943 INCHES NOMINAL |
| APERTURE DIAMETER | 1.620 INCHES NOMINAL |
| COUNTERBORE DEPTH | 0.071 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 1.851 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| COUNTERSINK DIAMETER | 0.411 INCHES NOMINAL |
| COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | COUNTERBORED W/ APERTURE |
| MATERIAL DOCUMENT AND CLASSIFICATION | VS1-1-6,FSCM 62983 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINOR THICKNESS | 0.092 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE DIAMETER | 0.218 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED, COUNTERSUNK |
| OUTSIDE DIAMETER | 2.710 INCHES MINIMUM AND 2.720 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SPECIAL FEATURES | 1.420 IN. WIDE SLOT IN APERTURE TO CBORE DIA OPPOSITE OD FLAT |
| STYLE DESIGNATOR | DEE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | VS1-3-1-8,FSCM 62983 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |