|
|
|
National Stock Number:
3110-00-119-6630
Federal Supply Class:
3110
National Item Identification Number:
001196630
Description:
PLATE,RETAINING,BEARING
Detail:
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
|
Manufacturer Information:
| 50558 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY A380.0 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591,ALLOY 10 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.918 INCHES MINIMUM AND | | 1.958 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/O APERTURE | | MINOR THICKNESS | 0.187 INCHES NOMINAL | | OUTSIDE RAISED SURFACE DIAMETER | 1.376 INCHES MINIMUM AND | | 1.378 INCHES MAXIMUM | | RAISED SURFACE HEIGHT | 0.110 INCHES NOMINAL | | MOUNTING HOLE TYPE | ROUND, UNTHREADED | | MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | MOUNTING HOLE ARRANGEMENT STYLE | SINGLE BOLT HOLE CIRCLE | | BOLT CIRCLE HOLE QUANTITY | 7 | | MOUNTING BOLT CIRCLE DIAMETER | 1.625 INCHES NOMINAL | | SPECIAL FEATURES | RAISED SURFACE CENTER DRILLED 1.125 IN. DIA BY 0.203 IN. DEEP W/INSIDE CORNERS ROUNDED BY 0.125 IN RADIUS,0.765 IN MIN,0.780 IN DISTANCE FROM CENTER TO FLAT ON OD AT 180 DEG | | SUPPLEMENTARY FEATURES | PAINTED,HSP 81 HAMILTON STD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 50558 |
|
|