| BORE DIAMETER | 0.0779 INCHES MINIMUM AND 0.0781 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DC33,FSCM 71984 MFR REF SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | CENTRIFUGE AT 100 G,S FOR 2 MINUTES WITH OIL,COAT INSIDE SHIELD FACESWITH GREASE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |