5365-00-062-4458 SPACER,RING Index 5306-00-062-4463 ROD,CONTINUOUS THREAD

National Stock Number:
3120-00-062-4459

Federal Supply Class:
3120

National Item Identification Number:
000624459

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
5179993835PARKER-HANNIFIN CORP
517990059211PARKER-HANNIFIN CORPORATION
517990093835PARKER-HANNIFIN CORP


Techincal Specification:
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORROUND
OUTSIDE DIAMETER1.4270 INCHES MINIMUM AND
1.4470 INCHES MAXIMUM
CORNER SHAPESQUARE ALL CORNERS
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL THICKNESS0.0580 INCHES MINIMUM AND
0.0600 INCHES MAXIMUM
CENTER HOLE SHAPE STYLEROUND
DIAMETER1.2010 INCHES MINIMUM AND
1.2030 INCHES MAXIMUM
THE MANUFACTURERS DATA
MANUFACTURERS CODE93835
DESIGN CONTROL REFERENCE5179900


Click here to Register for Free 30-day Trial