|
|
|
National Stock Number:
3120-00-074-2143
Federal Supply Class:
3120
National Item Identification Number:
000742143
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 22D3170-2 | 77272 | THE BOEING COMPANY | | 22D3170-2 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.2500 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.2500 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.6400 INCHES NOMINAL | | SURFACE FINISH | 250.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | 125.0 MICROINCHES LEFT END SURFACE OF BODY | | 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY | | 125.0 MICROINCHES RIGHT END SURFACE OF BODY |
|
|