5320-00-088-1828 RIVET,BLIND Index 1560-00-088-1834 SUPPORT,STRUCTURAL COMPONENT,AIR

National Stock Number:
3120-00-088-1833

Federal Supply Class:
3120

National Item Identification Number:
000881833

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
1300600BR59SIEMENS GOVERNMENT TECHNOLOGIES, INC.
13006082328DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE
158NF705582328DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE
130060830Q4CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
1300608FGX3CURTISS-WRIGHT ELECTRO-MECHANICAL CORP


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
BODY INSIDE DIAMETER1.1260 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.3760 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
FLANGE WIDTH0.1200 INCHES NOMINAL
OVERALL LENGTH0.7500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
MATERIALLUBRICANT LUBRICATION
SPECIAL FEATURESFLANGE FACE GROOVES MUST CONVERGE WITH INTERNAL GROOVES
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us