|
|
|
National Stock Number:
3120-00-090-5968
Federal Supply Class:
3120
National Item Identification Number:
000905968
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 0316688 | H0001 | DAF TRUCKS N.V. | | 1001W | 02413 | KERSEY / AMERICAN LAFRANCE A DIV OF FIGGIE INTERNATIONAL INC | | 1001W | 95019 | DANA CORP SPICER TRANSMISSION DIV | | 4730009902131 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310000905968 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310000905968 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7346746 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | G744-734-6746 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1045 OR | | STEEL COMP 1050 OR | | STEEL COMP 1055 OR | | STEEL COMP 1065 OR | | STEEL COMP 1075 OR | | STEEL COMP 1085 OR | | STEEL COMP 1095 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-777 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TYPE M,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 2.9950 INCHES MINIMUM AND | | 3.0050 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1520 INCHES MINIMUM AND | | 0.1530 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 2.0310 INCHES MINIMUM AND | | 2.0360 INCHES MAXIMUM | | SURFACE CONDITION | GROUND | | SPECIAL FEATURES | 13 SPLINES EQUALLY SPACED INSIDE DIA |
|
|