6620-00-098-5648 GLASS-TUBE ASSY Index 6620-00-098-5652 SHAFT AND SECTOR AS

National Stock Number:
3120-00-098-5651

Federal Supply Class:
3120

National Item Identification Number:
000985651

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
1207273-119315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
1207273-155972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
1207273-196774HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
DIAMETER1.0005 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM
FLANGE THICKNESS0.0370 INCHES MINIMUM AND 0.0390 INCHES MAXIMUM
LUBRICATION FEATUREGROOVE FLAT BEARING SURFACE
OUTSIDE DIAMETER1.1560 INCHES NOMINAL
OVERALL THICKNESS0.1560 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-354A,CLASS24S,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
SHANK OUTSIDE DIAMETER1.1080 INCHES MINIMUM AND 1.1088 INCHES MAXIMUM
SPECIAL FEATURES0.0100 IN. ECCENTRIC
STYLE DESIGNATORROUND
SURFACE TREATMENTANODIZE AND CHROMATE OVERALL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us