|
|
|
National Stock Number:
3120-00-106-4329
Federal Supply Class:
3120
National Item Identification Number:
001064329
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 1706A270 | 13002 | GOODRICH CORPORATION | | 1706A270 | 65910 | MAYDAY MANUFACTURING CO. | | 1706A270 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 1.1250 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 1.3160 INCHES MINIMUM AND 1.3200 INCHES MAXIMUM | | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER | | CORNER SHAPE | CHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER | | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER | | FLANGE OUTSIDE DIAMETER | 2.0000 INCHES NOMINAL | | FLANGE WIDTH | 0.2300 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 1.7900 INCHES MINIMUM AND 1.8000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COMP 4130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | SPECIAL FEATURES | COUNTERBORE,1.7600 IN. MIN,1.7700 IN.MAX,DIA,0.0600 IN. MIN,0.0700 IN. MAX,DEEP,LOCATED ON FLANGE FACE | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE FINISH | 125.0 MICROINCHES INTERMEDIATE LAYER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CPT 8204,13002 MFR REF 1ST TREATMENT RESPONSE OR CPT 8205,13002 MFR REF 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR CHROMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|