3120-00-107-1614, BEARING,SLEEVE

National Stock Number:
3120-00-107-1614

Federal Supply Class:
3120

National Item Identification Number:
001071614

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

K671164-13

84955

KAMAN AEROSPACE CORPORATION

Techincal Specification:

ANTIROTATION/LUBRICATION TYPE AND QUANTITY	1 HOLE
BODY INSIDE DIAMETER	1.5115 INCHES MINIMUM AND 1.5120 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.7545 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
FEATURES PROVIDED	CASEHARDENED
HOLE DIAMETER	0.2500 INCHES NOMINAL FIRST
LUBRICANT ACCOMMODATION STYLE	GROOVED OPEN BOTH ENDS
OVERALL LENGTH	2.0000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6709,COMP A,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL UNS K24065 OVERALL
SPECIAL FEATURES	PARTIAL GROOVE CUT ON O.D. ACROSS HOLE DRILLED THROUGH ONE WALL
STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE FINISH	32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	32.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	32.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE GROOVE LOCATION AND QUANTITY	1 INTERNAL
TEST DATA DOCUMENT	84955-KPS208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial