3120-00-110-2837, BUSHING,SLEEVE

National Stock Number:
3120-00-110-2837

Federal Supply Class:
3120

National Item Identification Number:
001102837

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

3120PL0885416	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
9601M58P02	07482	GENERAL ELECTRIC COMPANY
9601M58P03	07482	GENERAL ELECTRIC COMPANY
9601M58P06	07482	GENERAL ELECTRIC COMPANY

Techincal Specification:

BODY INSIDE DIAMETER	2.1040 INCHES MINIMUM AND 2.1060 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	2.2470 INCHES MINIMUM AND 2.2490 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE RIGHT FLANGE BODY CORNER
CORNER SHAPE	SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
LEFT FLANGE OUTSIDE DIAMETER	2.8400 INCHES MINIMUM AND 2.8800 INCHES MAXIMUM
LEFT FLANGE WIDTH	0.4010 INCHES NOMINAL
OVERALL LENGTH	1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5645 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
RIGHT FLANGE OUTSIDE DIAMETER	2.3980 INCHES MINIMUM AND 2.4000 INCHES MAXIMUM
RIGHT FLANGE WIDTH	0.0800 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM
SPECIAL FEATURES	OD SURF. RADIUS PORM 0.005 TO 0.015 IN. TO FLANGES;FROM OD SURF. PORM 0.136 TO 0.142 IN. RAISE TO DIA OF SMALL FLANGE 0.15 IN. AND .035 IN. R TO LARGE FLANGE;LARGE FLANGE 1/2 PORM 1.42 TO 1.44 R;OTHER 1/2 RECTANGULAR OPPOSITE SIDES FLUSH W RADIUS;FLAT SIDE PORM 1.28 TO 1.30 IN. FROM CENTER OF BORE;ALSO 2HOLES PORM 0.233 TO 0.239 DIA ON 1.5052 IN. BC 2.25 IN. APART;LARGE FLANGE IS LARGEST OD FLANGE
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGES BOTH ENDS
SURFACE FINISH	63.0 MICROINCHES LEFT END SURFACE OF RIGHT FLANGE
SURFACE FINISH	63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF RIGHT FLANGE

Click here to Register for Free 30-day Trial