| BORE CENTER TO SHANK END DISTANCE | 3.0450 INCHES MINIMUM AND 3.0650 INCHES MAXIMUM |
| BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| HARDNESS RATING | 58.0 ROCKWELL C NOMINAL INNER MEMBER |
| HARDNESS RATING | 32.0 ROCKWELL C NOMINAL RACE INSERT |
| HARDNESS RATING | 41.0 ROCKWELL C NOMINAL ROD END BODY |
| INNER MEMBER WIDTH | 0.6860 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.5550 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.8100 INCHES MINIMUM AND 1.8300 INCHES MAXIMUM |
| OVERALL LENGTH | 3.9600 INCHES MINIMUM AND 3.9800 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 77272114CS123-1 MFR REF SINGLE MATERIAL RESPONSE RACE LINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 MIL STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL INNER MEMBER |
| MATERIAL | STEEL ROD END BODY |
| MATERIAL | STEEL RACE INSERT |
| SPECIAL FEATURES | 8 DEG SELF-ALIGNMENT IN EITHER DIRECTION |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.6650 INCHES MINIMUM AND 1.6850 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 12000 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| TEST DATA DOCUMENT | 77272-5307 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 77272-5424 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 18 |