|
|
|
National Stock Number:
3120-00-111-5561
Federal Supply Class:
3120
National Item Identification Number:
001115561
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 520347K1 | 88853 | BCP CONSTRUCTION PRODUCTS DIV OF TEREX CORP |
|
Techincal Specification:
| DIAMETER | 4.4063 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | CHAMFERED FIRST INSIDE CORNER | | CORNER SHAPE | CHAMFERED SECOND INSIDE CORNER | | CORNER SHAPE | SQUARE FIRST OUTSIDE CORNER | | CORNER SHAPE | SQUARE SECOND OUTSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | LUBRICATION FEATURE | GROOVE LEFT SIDE | | LUBRICATION FEATURE | GROOVE RIGHT SIDE | | MATERIAL | COPPER ALLOY OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 6.5000 INCHES NOMINAL | | OVERALL THICKNESS | 0.3960 INCHES MINIMUM AND 0.4000 INCHES MAXIMUM | | SPECIAL FEATURES | TWO GROOVES ON ID 180 DEGREES APART | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | GROUND |
|
|