| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 7.2710 INCHES MINIMUM AND 7.2910 INCHES MAXIMUM |
| FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| INNER MEMBER WIDTH | 0.3790 INCHES MINIMUM AND 0.3840 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.6250 INCHES NOMINAL |
| LUBRICATION FEATURE | PERFORATION EXTERNAL OUTER MEMBER |
| OUTER MEMBER OUTSIDE DIAMETER | 1.1140 INCHES MINIMUM AND 1.1340 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM |
| OVERALL LENGTH | 7.8430 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,SAE 4130 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 410 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 440C FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 410 RACE INSERT |
| MATERIAL | STEEL COMP 4130 ROD END BODY |
| SHANK STYLE | INTERNALLY THREADED W/INSPECTION HOLE |
| SHANK THREAD LENGTH | 1.2500 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.438 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 20 |