| MATERIAL | ALUMINUM ALLOY INNER MEMBER |
| COPPER ALLOY RACE INSERT |
| ALUMINUM ALLOY 2024 ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM INNER MEMBER |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 2.1725 INCHES MINIMUM AND |
| 2.2025 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.9900 INCHES MINIMUM AND |
| 1.0100 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.6825 INCHES MINIMUM AND |
| 1.6925 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND |
| 0.2550 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.3380 INCHES MINIMUM AND |
| 0.3430 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 4200 POUNDS |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.1125 INCHES MINIMUM AND |
| 1.1425 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | KEYWAY LOCATED ON SHANK,CENTERED ON OUTER MEMBER WIDTH,0.093 IN. MIN,0.098 IN. MAX WIDTH,0.064 IN. NOMINAL DEPTH,1.7475 IN. NOMINAL LENGTH |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 12511 |
| DESIGN CONTROL REFERENCE | AA2513 |