|
|
|
National Stock Number:
3120-00-121-6666
Federal Supply Class:
3120
National Item Identification Number:
001216666
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 134CM10192-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | CORNER SHAPE | ROUND LEFT FLANGE BODY CORNER | | CORNER SHAPE | SQUARE INSIDE LEFT CORNER | | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER | | FLANGE OUTSIDE DIAMETER | 0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM | | FLANGE WIDTH | 0.1040 INCHES MINIMUM AND 0.1090 INCHES MAXIMUM | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | SPECIAL FEATURES | ID AT FLANGE END COUNTERSUNK 0.4970 IN. MIN,0.5170 IN. MAX DIA BY 99.5 MIN,100.5 MAX DEG ANGLE | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE FINISH | 125.0 MICROINCHES INTERMEDIATE LAYER | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|