|
|
|
National Stock Number:
3120-00-128-1907
Federal Supply Class:
3120
National Item Identification Number:
001281907
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| G613977-1 | 23667 | SMITHS DETECTION INC. |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TY 1 COMP B MIL SPEC ALL MATERIAL RESPONSES OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 0.9230 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1100 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.6890 INCHES NOMINAL | | LUBRICATION MATERIAL | LUBRICATING OIL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 23667 | | DESIGN CONTROL REFERENCE | G613977-1 | | MATERIAL | COPPER ALLOY OR | | IRON COMP B OR | | IRON COMP A1 OR | | IRON COMP A2 OR | | IRON COMP A3 OVERALL |
|
|