|
|
|
National Stock Number:
3120-00-128-1952
Federal Supply Class:
3120
National Item Identification Number:
001281952
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 01-081-0375 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 01-081-0375 | 10133 | MICROMATIC TEXTRON INC SUB OF TEXTRON INC | | CRBE-6-119 | 50830 | CABCO INDUSTRIES INC. | | DREM-6-078 | 81376 | RBC SOUTHWEST PRODUCTS, INC. |
|
Techincal Specification:
| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 2.9900 INCHES MINIMUM AND 3.0100 INCHES MAXIMUM | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM ROD END BODY | | HARDNESS RATING | 56.0 ROCKWELL C MINIMUM INNER MEMBER | | INNER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | OVERALL LENGTH | 3.5000 INCHES NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP 440C INNER MEMBER | | MATERIAL | STEEL COMP 630 RACE INSERT | | MATERIAL | STEEL COMP 630 ROD END BODY | | OUTER MEMBER OUTSIDE DIAMETER | 0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.4010 INCHES MINIMUM AND 0.4110 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 2.2500 INCHES NOMINAL | | STATIC RADIAL LOAD RATING | 10380 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|