|
|
|
National Stock Number:
3120-00-131-7158
Federal Supply Class:
3120
National Item Identification Number:
001317158
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 206-001-067-3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL INNER LAYER | | COPPER ALLOY INTERMEDIATE LAYER | | COPPER ALLOY OUTER LAYER | | MATERIAL DOCUMENT AND CLASSIFICATION | DU,78912 MFR REF SINGLE MATERIAL RESPONSE INNER LAYER | | DU,78912 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE LAYER | | DU,78912 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 0.7500 INCHES MINIMUM AND | | 0.7800 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0910 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.2510 INCHES MINIMUM AND | | 0.2610 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 206-001-067-3 |
|
|