|
|
|
National Stock Number:
4330-00-110-8396
Federal Supply Class:
4330
National Item Identification Number:
001108396
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 038062 | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| BODY DIAMETER | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.625 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | BODY OVERALL LENGTH | 4.625 INCHES MINIMUM AND 4.688 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | CELLULOSE FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|