|
|
|
National Stock Number:
4330-00-111-7114
Federal Supply Class:
4330
National Item Identification Number:
001117114
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2620-622X41PC4 | 96169 | ELECTRIC BOAT CORPORATION | | 50345-1 | 15472 | SOLVENTUM PURIFICATION INC. | | 77649-21X2PC4 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 2.760 INCHES NOMINAL | | BODY INSIDE DIAMETER | 13.440 INCHES NOMINAL | | BODY OVERALL LENGTH | 14.000 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 200.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 5.0 NOMINAL AND 25.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | COPPER ALLOY CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SPECIAL FEATURES | MOUNTING THREAD DIAMETER 1.153 INCH BY 1.062-12 UN 2B RH THREADS | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEMP RATING | 300.0 FAHRENHEIT NOMINAL |
|
|