| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| INSIDE DIAMETER | 0.219 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| OUTSIDE DIAMETER | 0.438 INCHES NOMINAL |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| INSIDE SURFACE CONDITION | SMOOTH |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 167.0 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT AND FIRE RETARDANT |
| MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL WORKING |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| VACUUM IN TORR | 76.2 |
| THREAD CLASS | 3B 2ND END |
| THREAD CLASS | 3B 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SPECIAL FEATURES | EXTERNAL SUPPORT CONSISTS OF AN ASBESTOS FIRE SLEEVE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |