| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE AND 1ST LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 14.750 INCHES MINIMUM OVERALL AND 15.250 INCHES MAXIMUM OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-24520 GOVERNMENT SPECIFICATION |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |