| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| INSIDE SURFACE CONDITION | SMOOTH |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| MEASURING METHOD AND LENGTH | 5.375 INCHES NOMINAL WORKING |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| OUTSIDE DIAMETER | 0.312 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIFICATION/STANDARD DATA | 96906-MS8005 GOVERNMENT STANDARD |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| VACUUM IN TORR | 50.8 |