| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | INVERTED FLARE 2ND END |
| CONNECTION STYLE | PLAIN OPTIONAL END 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.367 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND 1ST LAYER BRAIDED STEEL WIRE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND LIGHT RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 122.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| SEAT ANGLE | 30.0 DEGREES 2ND END |
| TEMP RATING | -40.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |