| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.485 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.015 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SEAT ANGLE | 12.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| SPECIFICATION/STANDARD DATA | SAE AS604,SIZE 10-81343 NATIONAL STD/SPEC AND 81343-AS622 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |