| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT WITH COMPRESSION SLEEVE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| HYDROSTATIC TEST PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.937 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 175.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 11.250 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.938 INCHES 1ST END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; NIPPLE,STEEL,FED STD 66,AISI MT1010 TO MTX 1020 CQGH1BESLEEVE,STEEL FED STD 66,AISI C1113,C1117,C1118 OR C1137 |
| SPECIFICATION/STANDARD DATA | MIL MIL-H-13444,TYPE 1 OR 2,SIZE 5/8 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| VACUUM IN TORR | 508.0 |