| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 27.750 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC AND |
| 1ST LAYER BRAIDED WIRE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| FLANGE THICKNESS | 0.312 INCHES NOMINAL 1ST END |
| 0.313 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.609 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| 1.750 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |