| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CONNECTION STYLE | FLARED 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER MOLDED RUBBER, SYNTHETIC AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 91.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PRESS-ON TYPE FITTINGS |
| SPECIFICATION/STANDARD DATA | SAE 100R2,TYPE A NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 1A 2ND END |
| THREAD CLASS | 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |