| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| BODY STYLE | PLAIN |
| CONCENTRIC HOLE DEPTH | 1.292 INCHES MINIMUM AND 1.302 INCHES MAXIMUM |
| CONCENTRIC HOLE DIAMETER | 0.270 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.558 INCHES MINIMUM AND 0.559 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END NOMINAL THREAD SIZE | 0.562 INCHES |
| FIRST END SEAT ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END STYLE DESIGNATOR | INVERTED FLARE |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD LENGTH | 0.312 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.604 INCHES MINIMUM AND 1.617 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.225 INCHES MINIMUM AND 1.239 INCHES MAXIMUM |
| OVERALL LENGTH | 1.823 INCHES MINIMUM AND 1.833 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | HEXAGON HEAD PHOSPHATE COATED |
| WIDTH ACROSS FLATS | 0.806 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| WRENCHING FEATURE HEIGHT | 0.229 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | HEXAGON |