|
|
|
National Stock Number:
4730-00-105-8711
Federal Supply Class:
4730
National Item Identification Number:
001058711
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| MS39212-8 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | FLANGE WIDTH | 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66, COMP 1113 FED STD 1ST MATERIAL RESPONSE OR FED STD 66, COMP 1117 FED STD 2ND MATERIAL RESPONSE OR FED STD 66, COMP 1118 FED STD 3RD MATERIAL RESPONSE OR FED STD 66, COMP 1137 FED STD 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137 | | SEAT ANGLE IN DEG | 40.0 | | SLEEVE OUTSIDE DIAMETER | 0.836 INCHES MINIMUM AND 0.840 INCHES MAXIMUM | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM OR CHROMATE |
|
|