|
|
|
National Stock Number:
4810-00-056-2519
Federal Supply Class:
4810
National Item Identification Number:
000562519
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 63A5A38-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CONNECTION STYLE | GASKET SEAL(BOSS) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL BOSS ALL ENDS | | CURRENT RATING IN AMPS | 0.300 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | POPPET | | FREQUENCY IN HERTZ | 400.0 | | NOMINAL THREAD SIZE | 0.437 INCHES ALL ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-4040,GROUP 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | MAGNESIUM ALLOY OVERALL | | MAXIMUM OPERATING TEMP | 71.0 DEG CELSIUS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE 2ND RESPONSE | | MOUNTING POSITION | HORIZONTAL | | PHASE | SINGLE | | THREAD SERIES DESIGNATOR | UNJF ALL ENDS | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 120.0 AC | | STYLE DESIGNATOR | STRAIGHT THRU | | TEST DATA DOCUMENT | 81349-MIL-S-4040 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD CLASS | 3B ALL ENDS |
|
|