|
|
|
National Stock Number:
4820-00-027-3550
Federal Supply Class:
4820
National Item Identification Number:
000273550
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2640-602ASSYT1-4IN | 96169 | ELECTRIC BOAT CORPORATION | | 2640-602ASSYT1-4INL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | SS845-2050985ASSYT1-4INL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | SS845-2050985ASSYT1-4IN | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 715 BODY | | COPPER ALLOY 630 FLOW CONTROL DEVICE | | COPPER ALLOY 715 SEAT | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | UNTHREADED EXTERNAL PIPE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 12.0 DEGREES 2ND END | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES 1ST END | | 0.250 INCHES 2ND END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END | | THREAD CLASS | 2B 2ND END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | INTEGRAL |
|