| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | OUTSIDE SCREW-YOKE |
| CONNECTION TYPE | FLANGE 1ST END |
| CRITICALITY CODE JUSTIFICATION | ZZZY |
| FEATURES PROVIDED | BONNET PACKING |
| FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 3.000 INCHES |
| FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| FLANGE SHAPE | ROUND 1ST END |
| FLOW CONTROL DEVICE | DISK |
| NOMINAL OUTSIDE DIAMETER | 3.750 INCHES 1ST END |
| NOMINAL THICKNESS | 0.500 INCHES 1ST END |
| MATERIAL | STEEL BODY |
| MATERIAL | STEEL FLOW CONTROL DEVICE |
| MATERIAL | STEEL SEAT |
| MATERIAL | STEEL STEM |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE |
| SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 3.000 INCHES |
| RAISED FACE NOMINAL DIAMETER | 1.375 INCHES 1ST END |
| RAISED FACE NOMINAL HEIGHT | 0.062 INCHES 1ST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS |
| VALVE OPERATION METHOD | MANUAL |
| VALVE SIZE | 0.500 INCHES |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |
| TEST DATA DOCUMENT | 96169-2620-925X1ASSYD1-2IN DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |