|
|
|
National Stock Number:
4820-00-079-0257
Federal Supply Class:
4820
National Item Identification Number:
000790257
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 701 | 14959 | CRANE CO DIV VALVE DIV |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | UNION | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END | | FLOW CONTROL DEVICE | STEM OR DISK | | NOMINAL PIPE SIZE ACCOMMODATED | 0.375 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390,ALLOY D4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH 2ND RESPONSE | | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH 1ST RESPONSE | | MAXIMUM OPERATING TEMP | 550.0 DEG FAHRENHEIT SINGLE RESPONSE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 18 1ST END | | THREAD SERIES DESIGNATOR | NPT 1ST END | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE |
|
|