|
|
|
National Stock Number:
4820-00-105-0213
Federal Supply Class:
4820
National Item Identification Number:
001050213
Description:
VALVE,SAFETY RELIEF
Detail:
A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.
|
Manufacturer Information:
| 4719-015 | 82386 | JAIDINGER MANUFACTURING CO INC |
|
Techincal Specification:
| BONNET TYPE | INSIDE SPRING | | BONNET ATTACHMENT METHOD | INTEGRAL | | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END | | CONNECTION STYLE | PLAIN (PIPE) 1ST END | | DISK LOADING METHOD | SPRING | | FLOW CONTROL DEVICE | POPPET | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOW CONTROL DEVICE | | MATERIAL | COPPER ALLOY SEAT | | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 125.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END | | OPENING PRESSURE SETTING | 155.0 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | ANGLE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD SERIES DESIGNATOR | NPT 1ST END | | VALVE DISCHARGE FLOW RATE | 3.0 CUBIC FEET PER MINUTE | | VALVE OPERATION METHOD | AUTOMATIC |
|
|