|
|
|
National Stock Number:
4820-00-127-4847
Federal Supply Class:
4820
National Item Identification Number:
001274847
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 114-6B | 58553 | SUPERIOR VALVE CO | | A15742 | 41947 | MUELLER BRASS | | EP20LA095 | 10855 | CARRIER CORP |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | PLAIN (PIPE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | FLOW CONTROL DEVICE | DISK | | MATERIAL | COPPER ALLOY AND PLASTIC POLYAMIDE FLOW CONTROL DEVICE | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | COPPER ALLOY STEM | | MATERIAL | COPPER ALLOY BODY | | MAXIMUM OPERATING TEMP | -40.0 FAHRENHEIT 1ST RESPONSE | | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.625 INCHES 1ST END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | NPT 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|