|
|
|
National Stock Number:
4820-00-915-5308
Federal Supply Class:
4820
National Item Identification Number:
009155308
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 31066-1 | 59431 | TECUMSEH PRODUCTS COMPANY LLC DIV TECUMSEH COMPRESSOR CO. LLC | | 31537 | 59431 | TECUMSEH PRODUCTS COMPANY LLC DIV TECUMSEH COMPRESSOR CO. LLC |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | PLUG | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | FLANGE 1ST END | | THREADED EXTERNAL TUBE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 2ND END | | SEAT ANGLE | 37.0 DEGREES 2ND END | | FLANGE SHAPE | OVAL WITH HOLES 1ST END | | NOMINAL THICKNESS | 0.308 INCHES 1ST END | | NOMINAL LENGTH | 2.426 INCHES 1ST END | | NOMINAL WIDTH | 1.366 INCHES 1ST END | | BOLT HOLE QUANTITY | 2 1ST END | | BOLT HOLE NOMINAL DIAMETER | 0.342 INCHES 1ST END | | BOLT CIRCLE NOMINAL DIAMETER | 1.610 INCHES 1ST END | | FLANGE FACE DESIGN | PLAIN SWIVEL 1ST END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | NOMINAL THREAD SIZE | 0.875 INCHES 2ND END | | THREAD CLASS | 3A 2ND END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | INTEGRAL | | SPECIAL FEATURES | ITEM HAS EXTRA CONNECTION ON SIDE BELOW BONNET THD EXT |
|