|
|
National Stock Number: 5305-00-040-4173
Federal Supply Class: 5305
National Item Identification Number: 000404173
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
3M263-5-17 | 73197 | HI-SHEAR CORPORATION | 3M263-5-17 | 76301 | THE BOEING COMPANY | 3M263-5-17 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | 3M263-5-17 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | 66117H5-17 | 56878 | SPS TECHNOLOGIES, LLC | 66117H5-17 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | FASTENER LENGTH | 1.513 INCHES MINIMUM AND 1.560 INCHES MAXIMUM | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM | HEAD DIAMETER | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK | INTERNAL DRIVE STYLE | HIGH-TORQUE | MATERIAL | STEEL OVERALL | MINIMUM TENSILE STRENGTH | 11050 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.312 INCHES | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MAC PS13145,76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | CADMIUM OVERALL | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM | THREAD QUANTITY PER INCH | 24 | THREAD SERIES DESIGNATOR | UNJF |
|
|