|
|
National Stock Number: 5305-00-043-0529
Federal Supply Class: 5305
National Item Identification Number: 000430529
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
7823864-1-04-13 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.151 INCHES MINIMUM AND 1.171 INCHES MAXIMUM FIRST HOLE | FASTENER LENGTH | 1.279 INCHES NOMINAL | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | GRIP LENGTH | 0.312 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | HEAD HEIGHT | 0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | HEAD STYLE | CROWNED HEXAGON | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | LOCKING FEATURE | DETENT BALL GRIP | MATERIAL | STEEL OVERALL | NOMINAL THREAD DIAMETER | 0.250 INCHES | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE | WIDTH BETWEEN FLATS | 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.268 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | THREAD QUANTITY PER INCH | 28 | THREAD SERIES DESIGNATOR | UNF |
|
|