|
|
|
National Stock Number:
5305-00-046-9990
Federal Supply Class:
5305
National Item Identification Number:
000469990
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LU2-5 | 06710 | VALLEY-TODECO, INC. | | BACB30LU2-5 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LU2-5 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU2-5 | 17446 | HUCK INTERNATIONAL, INC | | BACB30LU2-5 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LU2-5 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LU2-5 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LU2-5 | 57928 | SONIC INDUSTRIES, INC. | | BACB30LU2-5 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30LU2-5 | 82918 | THE BOEING COMPANY | | BACB30LU2-5 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU2-5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM | | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD DIAMETER | 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJC |
|
|