|
|
|
National Stock Number:
5305-00-068-8340
Federal Supply Class:
5305
National Item Identification Number:
000688340
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 1009376-1 | 04795 | BE AEROSPACE CONSUMABLES MANAGEMENT DBA AEROSPACE SERVICES DIV CONSUMABLES SOLUTIONS | | 1009376-1 | 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 1.620 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 1.780 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 2.280 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.199 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEAD HEIGHT | 0.123 INCHES NOMINAL | | HEAD STYLE | FILLISTER | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.046 INCHES NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SECOND DIAMETER FROM HEAD | 0.117 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNC |
|
|