|
|
|
National Stock Number:
5305-00-071-1787
Federal Supply Class:
5305
National Item Identification Number:
000711787
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 10082368 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12-720 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 1245509 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 179859 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 1863HX1 | 45152 | OSHKOSH CORP | | 1863HX1 | 75Q65 | OSHKOSH DEFENSE LLC | | 5305000711787 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5305000711787 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 71145-86 | 95097 | LITTLE GIANT CRANE AND SHOVEL INC | | AES01C438A12AW9A91 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | ASME B18.2.1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | B1821BH044C113N | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | MS90728-86 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | HEAD HEIGHT | 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | WIDTH BETWEEN FLATS | 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.884 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 14 | | THREAD SERIES DESIGNATOR | UNC |
|
|