|
|
|
National Stock Number:
5305-00-101-5701
Federal Supply Class:
5305
National Item Identification Number:
001015701
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 3MA583-9 | 76301 | THE BOEING COMPANY | | 3MA5A3-9 | 0FGC4 | SEY TEC, INC. | | 3MA5A3-9 | 3M7A1 | AEROSPEC FASTENERS INC. | | 3MA5A3-9 | 76301 | THE BOEING COMPANY | | 3MFRA583-9 | 76301 | THE BOEING COMPANY | | HT4062-3-9 | 17446 | HUCK INTERNATIONAL, INC | | HT4062-3-9 | 56878 | SPS TECHNOLOGIES, LLC | | HT4062-3-9 | 73197 | HI-SHEAR CORPORATION | | HT4062-3-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4062-3-9 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.952 INCHES MINIMUM AND 0.999 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.3765 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SPECIAL FEATURES | PRIMER COAT APPLIED TO HEAD | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE HEAD | | SURFACE TREATMENT | CADMIUM AND CHROMATE HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.406 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|