|
|
|
National Stock Number:
5305-00-112-1247
Federal Supply Class:
5305
National Item Identification Number:
001121247
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 150005-7 | 60119 | MONADNOCK COMPANY, THE | | 51B294-7 | 06725 | SPS TECHNOLOGIES, LLC | | 51B294-7 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 51B294-7 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 51B294-7 | 27624 | SPS TECHNOLOGIES LLC | | 51B294-7 | 73197 | HI-SHEAR CORPORATION | | 51B294-7 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 51B294-7 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 51B294-7 | 80539 | SPS TECHNOLOGIES, LLC | | 51B294-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 51B294-7 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.712 INCHES MINIMUM AND 0.775 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | HEAD DIAMETER | 0.496 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 4140 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD LENGTH | 0.264 INCHES MINIMUM AND 0.347 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|