|
|
|
National Stock Number:
5305-00-119-1614
Federal Supply Class:
5305
National Item Identification Number:
001191614
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| B1821BH075F150D | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | B1821BH075F150D | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | E102862 PART N0 102 | 3X894 | CONTROL FLOW, INC. | | E102862 PART NO 102 | 3X894 | CONTROL FLOW, INC. | | E103972 FIND N0 102 | 3X894 | CONTROL FLOW, INC. | | E103972 FIND NO 102 | 3X894 | CONTROL FLOW, INC. | | E104459 FIND N0 102 | 3X894 | CONTROL FLOW, INC. | | E104459 FIND NO 102 | 3X894 | CONTROL FLOW, INC. | | WG104387 | 3X894 | CONTROL FLOW, INC. | | WG139450 | 3X894 | CONTROL FLOW, INC. | | FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FFS85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS18153-159 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90726-185 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | XX003-2624 | H2229 | RDM TECHNOLOGY B.V. |
|
Techincal Specification:
| FASTENER LENGTH | 1.420 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.094 INCHES NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 8 GRADE | | WIDTH BETWEEN FLATS | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.170 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 16 |
|
|