5305-00-127-5392, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-127-5392

Federal Supply Class:
5305

National Item Identification Number:
001275392

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

10215654

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
COUNTERSINK ANGLE	98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FASTENER LENGTH	0.307 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD DIAMETER	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
SECOND DIAMETER FROM HEAD	0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.074 INCHES MINIMUM AND 0.114 INCHES MAXIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial