|
|
|
National Stock Number:
5305-01-034-2826
Federal Supply Class:
5305
National Item Identification Number:
010342826
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| M2002AK | 61208 | TWIN DISC, INCORPORATED |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | THREAD LENGTH | 0.750 INCHES NOMINAL | | FASTENER LENGTH | 1.438 INCHES MINIMUM AND | | 1.500 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | HEAD STYLE | HEXAGON | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 2A | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.243 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.563 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.282 INCHES MINIMUM AND | | 1.344 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.125 INCHES NOMINAL FIRST HOLE |
|
|